150 Ton Hydraulic Jack Hydraulic High Lift Jack Self - Locking

• Certification: GS, CE, ISO9001
• Pressure: Medium Pressure
• Work Temperature: Normal Temperature
• Acting Way: Single Acting
• Working Method: Straight Trip
• Adjusted Form: Switching Type
• Model NO.: CLL-508
• Structure: Piston Type
• Carrying Capacity: 55t
• Stroke: 150mm
• Stretch Height: 414mm
• Diameter: 125mm
• Weight: 26kg
• Transport Package: Wooden Box
• Trademark: ETERNAL
• Origin: China
• Production Capacity: 500 Pieces/Month

Product Description

Introduction
Self-locking hydraulic jack is mainly used in places that need to support heavy objects for a long time. It can still support heavy objects when the oil pressure is removed, and it is safe and reliable. It can be used underwater, for single-acting, for load retraction, and the nut self-locking makes the load safer. Especially in large projects, it is easy to operate and control. It is designed with a device to hold pressure and a built-in pressure relief valve to prevent overload for protection. These designs are used to protect the jack for safe operation. This jack adopts high-pressure hose and threaded joint connection, which is quick to use and overcomes the oil leakage of fast traditional joints.It is mainly used for equipment installation, lifting and dismantling operations in various industries such as electric power, construction, machinery manufacturing, mining, railway,bridges, and shipbuilding.

Technical Data

MODEL	Carrying capacity T(KN)	Stroke (mm)	Effective area cm^2	oil capacity (cm^3)	Height (mm)	Stretch height     (mm)	Diameter (mm)	Weight (kg)
CLL-502	55(489)	50	71.3	356.5	164	214	125	16
CLL-504		100		713	214	314		21
CLL-506		150		1069.5	264	414		26
CLL-508		200		1426	314	514		31
CLL-5010		250		1782.5	364	614		36
CLL-5012		300		2139	414	714		41
CLL-1002	100(889)	50	133.3	666.5	187	237	165	31
CLL-1004		100		1333	237	337		39
CLL-1006		150		1999.5	287	437		48
CLL-1008		200		2666	337	537		57
CLL-10010		250		3332.5	387	637		65
CLL-10012		300		3999	437	757		74
CLL-1502	150(1333)	50	198	990	209	259	205	53
CLL-1504		100		1980	259	359		66
CLL-1506		150		2970	309	459		78
CLL-1508		200		3960	359	559		92
CLL-15010		250		4950	409	659		105
CLL-15012		300		5940	459	759		118
CLL-2002	200(178)	50	266.5	1332.5	243	293	2 2 3 5	83
CLL-2006		150		3997.5	343	493		118
CLL-20010		250		6662.515	443	693		153
CLL-2502	280(2489)	50	366.4	1832	249	299	275	116
CLL-2506		150		5496	349	499		163
CLL-25010		250		9160	449	699		210
CLL-3002	350(3111)	50	457	2285	295	345	310	173
CLL-3006		150		6855	395	545		233
CLL-30010		250		11425	495	745		293
CLL-4002	430(3821)	50	559	2795	335	385	350	251
CLL-4006		150		8385	435	585		327
CLL-40010		250		13975	535	785		403
CLL-5002	565(5022)	50	730	3650	375	425	400	367
CLL-5006		150		10950	475	625		467
CLL-50010		250		18250	575	825		568
CLL-6002	660(5866)	50	857	4285	395	445	430	447
CLL-6006		150		12855	495	645		563
CLL-60010		250		21425	595	845		680
CLL-8002	880(5866)	50	1179	5895	455	505	505	711
CLL-8006		150		5895	555	705		871
CLL-80010		250		29475	655	905		1031
CLL-10002	1080(9600)	150	1465	7325	495	545	560	951
CLL-10006		50		21975	595	745		1143
CLL-100010		250		36625	695	945		1335

The parameters in the table may be changed due to improvement without notice

Notice
a) If there is a runaway phenomenon during use, you can first loosen the oil drain screw on the pump body, lift the pump body upright and run it downward, and then tighten the drain screw to continue using.
b) When there is a load, never remove the quick connector .
c) This machine uses oil as the medium, so the machine must be well maintained to avoid clogging or oil leakage.
d) For new jack or jack not used for a long time, there is more air in the cylinder. The piston rod may suddenly vibrate slightly when you start using it. The hydraulic jack can be reciprocated 2-3 times without load to eliminate air in the cavity. For jacks that have been idle for a long time, the hardening of the seals will affect the service life of the hydraulic jacks. Therefore, when the hydraulic jacks are not in use, it should be reciprocated 2-3 times a month without load. 

Our Company

    Jiangyin Eternal Heavy Industry Co., Ltd was established in 22, Apr. 2008. Our products mainly including: hydraulic baler, hydraulic shear, hydraulic cylinder and metallurgical Equipment. We could manufacture all kinds of hydraulic baler and hydraulic shear, pressure up to 1000 tons, and our machines have been exported to many countries.
   Our hydraulic cylinders are widely used in construction machinery, mining machinery, hydro power project, offshore drilling platform, steel plant equipment, marine machinery, hydraulic lifting system, metallurgical equipment, forging equipment etc. Max cylinder bore size reach 1,000 mm, max cylinder stroke reach 12 meter, max test pressure could reach 50Mpa. Our cylinder has passed through BV certification.
   We could also manufacture all kinds of metal extrusion press, pipe upsetting machine, including all kinds of steel plant spare parts.
   Our factory has 15,000 square meters and have heavy duty workshop with area 8,000 square meters. There is double layer crane in the work shop. The lifting height could reach 16 meter while lifting capacity could reach 75 tons.
   Our company passed the ISO9001: 2015, ISO14001: 2015, OHSAS18001: 2007, BV marine certification, API certification etc. Till now, our products have been exported to nearly 50 countries and own good reputation from our customers. You are welcome to visit our company.